Brikolite Sizes
| Serial No | Dimension of AAC Blocks(L X H X B) | No.of AAC Blocks in 1 Cubic Meter |
|---|
| 1 | 600*200*075 MM | 111 Pcs (Approx) |
| 2 | 600*200*100 MM | 083 Pcs (Approx) |
| 3 | 600*200*125 MM | 066 Pcs (Approx) |
| 4 | 600*200*150 MM | 055 Pcs (Approx) |
For example: If the height of the wall is 10 feet and its length is 20 feet, the area of the wall is 200 square feet. About seven modular thin brick are needed to cover a square foot, so 200 square feet X 7 thin brick per square foot = 1,400 thin brick to cover the wall.
The recommended maximum number of brickwork courses to lay in a day is 16. how many 8 block can a Mason lay in a day? When a mason is laying between 90 to 120 block per day, every pound matters.
Standard Blocks
| Nominal Size (in) | Actual Size (in) |
|---|
| 6 x 8 x 16 | 5-5/8 x 7-5/8 x 15-5/8 |
| 8 x 8 x 16 | 7-5/8 x 7-5/8 x 15-5/8 |
| 10 x 8 x 16 | 9-5/8 x 7-5/8 x 15-5/8 |
| 12 x 8 x 16 | 11-5/8 x 7-5/8 x 15-5/8 |
Calculation of quantity of material for 12 mm thick plaster of ratio 1: 6 (1 Cement:6 Sand) in the wall for 100 Sqm
- Quantity of Cement = 2/(1+6) × 1 (1 Ratio of cement)
- In Kg = 0.30 × 1440 (Density of cement = 1440 kg/m3)
- Quantity of Sand = 2/(1+6) × 6 (6 Ratio of sand)
- In Cubic Feet = 63.558 cft (1 Cum = 35.31 cft)
Mix cement and sand in the ratio of 1:6 (1 cement:6 sand) for inner plastering of bricks. And for outer plastering mix it in the ratio of 1:4. On a brick wall never do plastering of thickness more than 12 or 15mm.
How To Calculate Number Of Bricks, Cement And Sand For Brickwork?
- Standard Size of Brick = 190 x 90 x 90 (mm) Quality check of brick. Mortar Thickness is = 10 mm.
- Mortar quantity is 0.2305 (Wet Condition) we calculate Dry Value.
- Volume = 0.306565x (1/7) = 0.0438.
- Volume = 0.306565x (6/7) = 0.2627.
The amount of paint required is therefore:
- Surface area: 42 square metres.
- Divided by. Spreading rate: 11 square metres per litre.
- Multiplied by. Number of coats: 2 coats.
- Equals. 42/11 x 2 = 7.6 litres.
Quantities of Cement, Sand and Water in Various Plaster Mix ratios
| Area (Sqm) | Plaster thickness (mm) | Cement (in Kgs) |
|---|
| 10 | 12 | 49.37 |
| 10 | 12 | 39.29 |
| 10 | 12 | 32.54 |
| 10 | 12 | 27.80 |
1) Plastering with any mortar 12mm (5”) thick – 3 masons, 3 mazdoors and 1 bhisti can plaster 40sqm (400a ft) per day.
For a singular layer brick wall, multiply the length of the wall by the height to get the area. Multiply that area by 60 to get the number of bricks you should need, then add 10% for wastage. That's the short answer and assumes 'standard' brick and mortar sizes.
To plaster 100 square metres (15 millimeters thick) you will need: 12 bags cement + 2,3 cubic metres sand. Using masonry cement complying with SANS 50413 class MC 22,5X or MC 12,5. To plaster 100 square metres (15 millimeters thick) you will need: 14 bags cement + 2,25 cubic metres sand.
For example, if the average indicator is 2 cm or 0.02 m, then you need to count as follows:
- multiply the thickness of the layer by the area (1m2) and get the volume of the necessary solution - it will be 0.02 m3;
- translate into liters and get 20 liters;
- determine the proportion of cement - it will be 0.005 m3;
The table below is a tool for estimating the number of bricks needed for a job. For example, if you are using King Size brick on 1000 square feet, your calculation would be 1000 * 4.7 = 4700 bricks for the job. The number of masonry cement bags will then be 470/1000*6 = 2.82 bags.
4.5 inch brick wall calculation for brickworkGenerally cement mortar ratio 1:6 is used for 9 inch & 13.5 inch brickwork and cement sand ratio 1:4 or 1:5 is used for 4.5 inch or 4 inch thick brick wall.
How many bricks in 100 square feet for 9 inch brick wall. =8.58×100 = 858 number of bricks.
Determine the amount of bricks needed for the job by multiplying the square footage -- 120 square feet -- by the number of bricks in a square foot -- 4.5. For this instance, 540 bricks are needed. Keep in mind some bricks may be damaged or unusable, so purchase more than necessary for the job.
What's Window to Wall Ratio? You simply divide the total glazing (window) area by the total wall area. That's your EDGE window-to-wall ratio.
BRICK DIMENSIONS GUIDE
| BRICK SIZE | APPROXIMATE WEIGHT | SIZE (INCHES) (Bed Depth X Height X Length) |
|---|
| MODULAR | 4.2 lbs. | 3-5/8" x 2-1/4" x 7-5/8" |
| STANDARD | 4.5 lbs. | 3-5/8" x 2-1/4" x 8" |
| JUMBO MODULAR | 5.1 lbs. | 3-5/8" x 2-3/4" x 7-5/8" |
| JUMBO STANDARD | 5.9 lbs. | 3-5/8" x 2-3/4" x 8" |
The typical height of a garden wall is between 1 - 2 metres and the price increases if a longer fence is required with single or double skin thickness. A brick garden single skin wall which is 1m high by 4m long will approximately cost around £650, whereas a 1m high and 12m long wall will cost around £1,400.
how many modular bricks in 9 inch wall of 1 square foot
- We have to add cement mortar thickness that is 10 in each measurement of brick dimension.
- convert brick size millimetre to metre dividing by 1000 we get.
- volume of modular brick with mortar thickness.
- volume of brickwork=area×thickness.
A good mix for bricks would be 6 sand to 1 cement. You can lay probably 180 bricks per mix using 6 sand (25kg bag) and 1 25kg bag of cement.
- Place the scale drawing of the circle flat on a table.
- Draw a perfect square around the circle.
- Calculate the area of the square, and divide that by the surface area of the facing-out side of a brick. This method yields a ceiling estimate of the number of bricks you will need.
- Have someone else duplicate your work.
The following calculations are based on approximately 0.6m3 (1.2T) of damp sand, which will lay approximately 1,000 standard bricks.
Measure out 4 parts sand and 1 part cement, and use a shovel to mix it dry on the platform. Make a crater in the middle of the mix, and add a bucket of water and the appropriate amount of lime or mortar additive. Mix thoroughly by shoveling the bottom of the mix to the top and repeating.
Which is the best cement for house construction?
- Ordinary Portland Cement (OPC) 43 Grade Cement: It is used majorly for wall plastering works, Non-RCC structures, pathways etc.
- Ordinary Portland Cement (OPC), 53 Grade Cement:
- Portland Pozzolana Cement (PPC):
- Portland Slag Cement (PSC):
- White Cement:
For a standard mortar mix this normally on a ratio basis (usually around 3 or 4 parts building sand to 1 part cement) recommendations vary – but you don't want the mixture to be too wet or too dry.
One cubic metre of concrete weighs 2.5 Tonnes. Typically, 1m3 of concrete is made up of 350Kg of cement, 700Kg of sand, 1,200Kg of chippings and 150 Litres of water. The mix design process can either be conducted on the basis of charts or experimentally.
