Answer: Tich, it's purely aesthetic. Nothing else. Most guitars don't need pickguards, because most people don't harm their guitar with a pick. Even those with pickguards have them for cosmetic reasons.
Thin Martin pickguards like this one usually come off cleanly when you get under them with bridge removal knives. Sometimes a little heat helps things along — that's what I'm using the desk lamp for here. Don't leave it heating long; you just want to warm it, then gently lift the plastic as it releases.
Its universal shape fits any Taylor acoustic guitar. Always remove pickguard from guitar when not in use. All glossy finished Taylor Guitars built in 1995 or later use a UV cured finish that is less susceptible to damage, though it is recommended to remove pickguard when not in use.
It's easy. You people think it's like putting one on a Strat. You need to align the pickguard and drill holes for the screw on the body and the bracket for the guard. You may need to modify it slightly if there is a control knob in the way but it should fit fine otherwise.
With a bandsaw or coping saw, rough-cut the pickguard to shape, leaving it oversize by at least 1/16". Fasten it to the top of the template with pieces of double-stick tape placed around the perimeter (but back from the edge so the cutter bit won't come into contact and become gummy and load up).
In this guide, first, we'll look at the
best pickguard material sheets.
IKN Guitar Bass Pickguard Material
- 3 Ply Cream.
- 3 Ply Mint Green.
- 4 Ply Aged Pearl.
- 4 Ply Black Pearl.
- 4 Ply Blue Pearl.
- 4 Ply Brown Pearl.
- 4 Ply Brown Tortoise.
- 4 Ply Gray Pearl.
Installation: With a soft cloth remove all polish and wax in the area the pickguard is to be installed. Use a small amount of paint thinner or Naphtha for this process. Make sure the area is completely dry and completely dust free and do not let dust get under the surface of the pick guard when installing.
Acoustic guitars have proven to the ears of many players - to sound better as they age. The theory that best explains this is - that as the wood in the body ages, it becomes lighter and more responsive and more resonant. It makes very little sound on it's own.
5 Tone Tips: You'll Just Sound Better
- Have a well-organized pedal board. Effects pedals are a terrific way to develop your own tonal identity.
- Properly intonate your instrument. Climate change, storage and even just everyday use can throw your instrument out of intonation.
- Adjust the pickup height.
- Know your strings.
- Use quality cables.
“It is never possible to make a cheap electric guitar sound like the Gibson ES-335 Satin.” Did I smash your heart? Don't just feel broken yet. Nowadays, lots of brands are making quality guitars and selling them at a sensible cost. You can get the best electric guitar under 300 dollars if you are smart enough.
The metal pickguard should act as a shield. In theory, it should be (electrically) tied into the ground circuit by bolting the pots to the guard. Shielding does not appear to be the problem here.
The anodized aluminum pickguard is a great shield itself, no need to add aluminum foil to a sheet of aluminum.
Custom metal hardware can add some real class to an instrument. Making pickguards or control plates from aluminum plate is really pretty simple, and is mostly done with hand tools. The only power tools I used were a drill press, a bandsaw, a stationary belt sander and a bench grinder with a finishing wheel.
Replacing pickguard is probably best approach, unless it's vintage, and if so, you have just contributed to it's "character". You may be able to lessen the appearance of the scratches just a bit by extremely careful application of toothpaste, rubbing gently with a fingertip, with water.
You could also use Novus plastic polish, or the plastic polish for use on cars (I think Meguiars makes something for that IIRC). Just make sure that you're removing the pickguard first, and then thoroughly clean it afterwards.
Yesjust take the strings off and unscrew it. There should be several screws holding it to the body. you don't need to take the strings off to remove the pickguard from a les paul.
