To turn on, press and hold the Multifunction button for about 2 seconds. The headset will say “power on” and the blue status indicator light will flash.
How to pair Bluetooth headphones with your phone
- Open the Settings app on your phone.
- Tap Connected devices.
- Tap Pair new device.
- Make sure your headphones are in pairing mode (see the owner manual on how to do this).
- Tap the headphones under the list of available devices.
If your computer is equipped with Bluetooth (and these days, most are), then you can connect Bluetooth headphones to your PC in the same way you use them with your smartphone. You can connect your headphones to the PC using the Devices section of the Settings app on your PC.
Step 1: Pair a Bluetooth accessory
- Swipe down from the top of the screen.
- Touch and hold Bluetooth .
- Tap Pair new device. If you don't find Pair new device, check under "Available devices" or tap More. Refresh.
- Tap the name of the Bluetooth device you want to pair with your device.
- Follow any on-screen instructions.
Listening to music from a device connected via BLUETOOTH
- Connect the headset to a BLUETOOTH device.
- Wear the headset. Put the headset with indication to the left and indication to the right.
- Play back music or video on the BLUETOOTH device.
- Adjust the volume by pressing the +/- buttons of the headset.
Galaxy Buds work with an iPhone — here's how to pair them
- Open the Settings app on your iPhone and scroll down to Bluetooth.
- Tap the Bluetooth tab to open the pairing screen (and see a list of all paired devices).
- Make sure the button at the top of the screen is toggled on (to green).
How to Connect Compatible Xbox One Wireless Headsets
- Turn your headphones to 'pairing mode'.
- Proceed to turn your console on by pressing the console's power button.
- Still, on your console, locate the Pairing Button.
- Enable pairing by pressing on the Pairing Button on your console until its LED light blinks.
Connecting to a paired Android smartphone
- Unlock the screen of the Android smartphone if it is locked.
- Turn on the headset. Press and hold the button for about 2 seconds.
- Display the devices paired with the smartphone. Select [Setting] - [Bluetooth].
- Touch [MDR-XB650BT]. You hear voice guidance “BLUETOOTH connected”.
Bluetooth headphones pairing procedure
- Press and hold on the. (power) button for approx.
- The indicator will flash.
- Confirm that the indicator continues to flash after releasing your finger from the button.
- Perform the pairing procedure on the source device to detect your Bluetooth headphones.
Check audio settings and restart the deviceJust open up the audio settings on your device and check the volume level and any other settings that might mute the sound. Normally, there aren't many settings like these on a smartphone, so you should find the problem more or less right away.
Follow these steps to check this: Right click on the volume icon and select “Playback devices”. Now, right click on empty space and select, “Show disconnected devices” and “Show disabled devices”. Select “headphone” and click on “Properties” and make sure that the headphone is enabled & set as default.
Android settings prevent headphones from workingIf they're still not working, your headphones are the problem. If your headphones do work in another device but not in your smartphone, your phone's the problem. Check your sound settings. Tap on Volume and similar settings to make sure your sound settings are turned on.
Android lets users select which audio output the Bluetooth device will be used for. By default, it's set to both Phone and Media. If you're getting no sound out of your Bluetooth headphones, make sure that the Media Audio setting is turned on. With your Bluetooth headphones connected, go to Settings —-> Bluetooth.
If you don't want to use Bluetooth you can buy dedicated wireless headphones instead. Typically, a dedicated wireless headphone comes with a base station. This station plugs into your TV through optical or 3.5mm analog jack and works over a radio frequency transmission instead of a Bluetooth.
If your Bluetooth headphones won't turn on, it's probably not broken. You simply need to reset it. In fact, you can solve many problems with a Bluetooth headset with a quick factory reset, such as: If your headphones keep disconnecting from your device, even though they're both fully charged.
Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. To remove debris, gently brush all openings with a small, soft-bristled brush that's clean and dry. Firmly plug your headphones back in.
If a pair of headphones won't work with your laptop computer, this means that the headphone jack itself has become disabled. Right-click on the listing in the "Playback Devices" window that reads "Headphones." Click "Enable." Your headphones will now work with your laptop computer.
for some circumstances, you find that your Bluetooth Headset Device is not working Correctly or might be the wire of the Bluetooth Earphone maybe Broken. So, all of the cases you can repair your Headphone in an Easy and systematic way.
EASY BLUETOOTH HEADPHONE RESET: Turn off bluetooth headphones, reset bluetooth headphones by pressing power button for 15 seconds, delete the bluetooth headphones from your phone or device paired list, restart your device and re-pair the bluetooth headset.
On Android
- Turn on your phone and hit the Menu button.
- Check the "Bluetooth" box to turn on Bluetooth, then hit "Scan for Devices".
- Turn on your Bluetooth headset and put it in "discoverable" mode.
- Once your headset shows up on the list of devices, tap it to pair the devices.
How to connect an Android phone to your car with Bluetooth
- Step 1: Initiate paring on your car's stereo. Start the Bluetooth pairing process on your car's stereo.
- Step 2: Head into your phone's setup menu.
- Step 3: Select Bluetooth Settings submenu.
- Step 4: Select your stereo.
- Step 5: Enter PIN.
- Step 6: Enjoy your music.
