Press the Home button on your remote, and select the cog icon in the top-right corner of your screen to open the Settings menu. Next, head to General = Resets to Initial Settings. Follow the on-screen instructions to complete the reset.
Check your connections:
- Unplug the HDMI cable from your Bell MTS Fibe TV Set-top Box.
- Wait 30 seconds.
- Plug the HDMI cable back in.
- Wait for the signal to initialize.
- Make sure all cables connected on the set-top box and your TV are secure.
Press and hold the Volume Down button and the Power button. When the LG logo is displayed release the Power button only then immediately press and hold the Power button again. Release both buttons when the Factory data reset screen displays. From the Factory data reset screen, select Yes.
Try a reset, unplug the TV, then press and hold the power button ((on the TV set)) for 30 seconds, then release it. Then wait 10 minutes and plug the set back in, press and hold the power button again on the set until it turns on.
How do I perform a (soft) restart (reset) or Power cycle on Sony's Android TV?
- Point the remote control to the illumination LED and press and hold the POWER button of the remote control for about 5 seconds until a message Power off appears. [1]: illumination LED.
- TV reboots automatically.
- TV reset operation is complete.
Open the settings menu on your device, tap on “Apps”, and select YouTube. The next step is to choose “Storage”, which will bring up two options: Clear data and Clear cache. Clear the cache first and check if YouTube now works as it should. If it doesn't, go back and clear data as well to see if that solves the problem.
If Netflix freezes or gets stuck loading, but the rest of your device remains functional, it typically points to information stored on your device that needs to be refreshed. Follow the troubleshooting steps for your device below to resolve the issue.
You can reset and eliminate the lock on some televisions without the remote, using a few tactics. Hold the power button for five seconds. The television will automatically restart. If the lock is still on, unplug the television and remove the battery from the back panel of the television.
Yes, that's right bake your motherboard. Baking your motherboard is a crude method to fix issues with on board GPU failures or other chip failures.
You can reset and eliminate the lock on some televisions without the remote, using a few tactics. Hold the power button for five seconds. The television will automatically restart. If the lock is still on, unplug the television and remove the battery from the back panel of the television.
LG seems to have a problem with backlight, you'll feel when it goes black on screen the back of the tv is super hot. SOLUTION: Change the picture mode to “Standard", then make sure that your backlight setting is at it lowest. Power supply failure to backlight LEDs.
- Click Settings button on remote controller.
- Click More Settings icon at the bottom right of the screen.
- Access the GENERAL menu.
- Scroll down to the very last option from the list.
- Change settings from Store Mode to Home Mode.
Try to unplug the cord, wait for 10 seconds, and then plug it back in. If the status LED is lit, try to turn on the TV using the power switch on the unit, not on the remote. If the TV turns on with the Power button, the remote control may not be working.
Perform a power reset by unplugging the power cord
- Turn off the TV.
- Unplug the power cord for two minutes, and then plug it back in.
- Turn on the TV.
- Verify if it resolves the issue.
